Maternity TENS Machine Tens Unit tens machines pain relief use a tens

Delivery is Free

Return Postage is Free with all Hire’s

NHS

National Health Service Supplier

Contact Us

Your are currently in: Maternity Tens > Neurotrac Labour Tens            

• Suitable for Obstetrics and Labour pain relief
• Digital Dual Channel Obstetrics TENS machine
• 1 Dedicated Labour Pain programme for ease of use
• Remote Boost switch for additional pain control at times of intense pain
• No known side effects for mother or baby
• For use during labour and after labour. Not to be used the on set of labour pains/contractions.  Also, do not use before your 37th week of pregnancy.
• User friendly
• Compact, light and reliable

All accessories are included:

Full Instructions Booklet included with every NeuroTrac Continence. Remote switch and batteries and 4 x large electrodes are included. 2 years warranty on materials, components and workmanship. The base unit measures 100 x 55mm.

This machine comes complete with the remote booster switch.

The beauty of this product is its simplicity and effectiveness. It is easy to see why it is one of our best selling maternity units. Recommended.

1 x Neurotrac Labour, Dual channel Tens unit
2 x Lead Wires
1 x Hand Held Control Switch
1 x Pack electrodes (4, each 50 x 100 mm)
2 x 9v batteries
1 x Instruction Manual - 1 x Hard Case Case

Specifications:
1. Dual channel: individually isolated circuits.
2. Amplitude: 0-80 mA; indication only; actual mA will tend to be less than indicated due to electrode impedance.
3. Type: Constant Current.
4. Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
5. Pulse width: 220mS [2% accuracy].
6. Pulse Rate: 90Hz (Continuous mode) [2% accuracy].
7. Mode: Continuous (Boost mode).
8. Burst mode: Bursts of 9 pulses [200 mS] at 150 Hz, repeating twice every second (Rest mode).
9. Ramp up Time: 0.8 seconds from Rest to Boost
10. Time duration: continuous until switched off.
11. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
12. If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
13. Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
14. Physical dimensions: 108 x 62 x 23 mm.
15. Weight: 0.09KG without battery, 0.14KG with battery.
16. Environmental conditions for storage & transport:
       -10 to +50 degrees Centigrade
       0-90% Humidity.

Electrodes for TENS, EMS - Re-useable!

Our Skin Electrodes are suitable for all TENS, STIM, FES and EMG applications and available in a wide range of shapes and sizes.

Our Skin Electrodes are designed to be reusable, comfortable, durable and long lasting

Look for a long lasting (25-30 Applications) sticky and pliable skin electrode !

Re-useable electrodes designed for comfort and durability, they provide the optimum adherence and conductivity to the skins surface. Pliable construction allows the electrode to mould and stick comfortably to the skins surface whilst evenly dispersing the current to the treated area. CE Approved.

---------------------------------------------------------------------------------------------------

Re-useable electrodes designed for comfort and durability, they provide the optimum adherence and conductivity to the skins surface. Pliable construction allows the electrode to mould and stick comfortably to the skins surface whilst evenly dispersing the current to the treated area. CE Approved.

We also Sell other leading brand Maternity Tens Machines

<<< Previous page                 Next Page >>>